Etheno-dA-CE Phosphoramidite - (10-1006)
5'-Dimethoxytrityl-etheno-deoxyAdenosine,3'-[(2-cyanoethyl)-(N,N-diisopropyl)]-phosphoramidite
As low as
$125.00
In stock
Only %1 left
default
10-1006
5'-Dimethoxytrityl-etheno-deoxyAdenosine,3'-[(2-cyanoethyl)-(N,N-diisopropyl)]-phosphoramidite
Description
Etheno-dA is a fluorescent nucleoside which is especially useful in observing the transition between DNA structural types. It is quite base labile and should be deprotected with ammonium hydroxide at room temperature for 24 hours. Alternatively, UltraMild chemistry can be used. 2-Aminopurine and AP-dC (G-Clamp) are also useful fluorescent
Details
Usage
- Coupling: No changes needed from standard method recommended by synthesizer manufacturer. The use of UltraMILD monomers are preferred. (Catalog Numbers: dA: 10-1601-xx, dC: 10-1015-xx, dG: 10-1621-xx, dT: 10-1030-xx). To avoid any exchange of the iPr-Pac group on the dG with acetyl, use the UltraMild Cap Mix A (40-4210-xx/ 40-4212-xx).
- Deprotection: If UltraMILD reagents were used, deprotect in 0.05M Potassium Carbonate in Methanol for 4 hours at Room Temperature OR for 2 hours at hours in 30% Ammonium Hydroxide. If standard bases were used, deprotection in Ammonium Hydroxide at Room Temperature for 24-36 hours will give acceptable yields.
| Specifications | |
|---|---|
| Diluent | Anhydrous Acetonitrile |
| Recommended Storage | Refrigerated storage, maximum of 2-8°C, dry |
| Stability In Solution | 1-2days |
Dilution/Coupling Data
The table below show pack size data and, for solutions, dilution and approximate coupling based on normal priming procedures.
ABI 392/394
| Catalog # | Pack Size | Grams/Pack | 0.1M Dil. (mL) | Approximate Number of Additions | |||||
|---|---|---|---|---|---|---|---|---|---|
| LV40 | LV200 | 40nm | 0.2μm | 1μm | 10μm | ||||
| 10-1006-02 | 0.25 g | .25grams | 3.21 | 93.67 | 56.2 | 35.13 | 25.55 | 18.73 | 4.68 |
| 10-1006-90 | 100 µmol | .078grams | 1 | 20 | 12 | 7.5 | 5.45 | 4 | 1 |
Expedite
| Catalog # | Pack Size | Grams/Pack | Dilution (mL) | Approximate Number of Additions | ||||
|---|---|---|---|---|---|---|---|---|
| Molarity | 50nm | 0.2μm | 1μm | 15μm | ||||
| 10-1006-02 | 0.25 g | .25grams | 4.8 | 0.07 | 89.6 | 56 | 40.73 | 5.6 |
| 10-1006-90 | 100 µmol | .078grams | 1.5 | 0.07 | 23.6 | 14.75 | 10.73 | 1.48 |
Technical documents
Certificate of analysis
CoA search tool
Related products
Related Products
tC-CE Phosphoramidite
Cat. No.: 10-1516
tC°-CE Phosphoramidite
Cat. No.: 10-1517
Pyrrolo-dC-CE Phosphoramidite
Cat. No.: 10-1017
2-Aminopurine-CE Phosphoramidite
Cat. No.: 10-1046
Pyrene-dU-CE Phosphoramidite
Cat. No.: 10-1590
Perylene-dU-CE Phosphoramidite
Cat. No.: 10-1591
Products FAQS
Due to the structure of the 1, N6 etheno structure etheno dA will not base-pair with T or dU. For this reason oligonucleotides with etheno-dA in the middle or 3'-end will not act as PCR or sequencing primers. However if located at or near the 5''-end etheno-dA can be incorporated one or more times and still act as an effective sequencing or PCR primer (1). Etheno-dA is somewhat labile to NH4OH so it is best to use base labile protecting groups such as Pac dA, isopropyl-Pac-dG and Ac-dC and either deprotect with K2CO3:MeOH, 4 hr. at RT. or NH4OH 4 hr. at RT.. If using standard protecting groups use mild deprotection conditions (0.4 M Methanolic NaOH; MeOH:H2O, 4:1) 17 hr. at room temperature.
To request a quote for products:
- Click “Contact Us” in the header bar above;
- Click “Customer Service”;
- Complete the form and provide the following information in the “Comments” section: note you would like a quote, item number (SKU) and quantity;
- Click “Submit”.