dC-Thiophosphoramidite - (10-1710)
5'-Dimethoxytrityl-N-benzoyl-2'-deoxyCytidine,3'-[(ß-thiobenzoylethyl)-(1-pyrrolidinyl)]-thiophosphoramiditeReplacing two non-bridging oxygen atoms with sulfur atoms in a DNA phosphodiester linkage creates a phosphorodithioate (PS2) linkage.1 Like natural DNA, the phosphorodithioate linkage is achiral at phosphorus. This analog is completely resistant to nuclease degradation and forms complexes with DNA and RNA with somewhat reduced stabilities.2 Moreover, it has been found that PS2-ODNs bind proteins with a higher affinity than their phosphodiester analogues2-6 suggesting that PS2-ODNs may have additional utility in the form of sulfur-modified phosphate ester aptamers (thioaptamers)3,6-8 for therapeutic and diagnostic applications. Thiophosphoramidites are now commercially available after recent work at AM Biotechnologies (www.thioaptamer.com).
- Thiophosphoramidites (ThioPAs) are not soluble in anhydrous acetonitrile diluent. Rather, 10% DCM (v/v) in acetonitrile is an ideal diluent for all four of the thioPAs for a final amidite concentration of 0.15 M.
- ThioPAs are somewhat less stable than normal DNA phosphoramidites in anhydrous acetonitrile containing 10% DCM; however, the coupling efficiency of all four thioPAs is not reduced after two days in solution at room temperature.
- After synthesis, the thioPA bottle on the synthesizer should be replaced with one containing acetonitrile diluent and the synthesizer line flushed with acetonitrile.
A typical cycle for the solid-phase synthesis of a PS2 linkage is different from a standard cycle for the synthesis of normal phosphate linkages. After coupling, the resulting thiophosphite triester is then sulfurized with DDTT. Capping is carried out AFTER sulfurization. Upon completion of the automated synthesis, deprotection is carried out using a concentrated ammonia:ethanol (3:1, v:v) mix containing 20 mM DTT at 55°C for 15-16 h.
REFERENCES
- J. Nielsen, W.K.D. Brill, and M.H. Caruthers, Tetrahedron Letters, 1988, 29, 2911-2914.
- L. Cummins, D. Graff, G. Beaton, W.S. Marshall, and M.H. Caruthers, Biochemistry, 1996, 35, 8734-41.
- X. Yang, and D.G. Gorenstein, Curr Drug Targets, 2004, 5, 705-15.
- W .S. Marshall, and M.H. Caruthers, Science, 1993, 259, 1564-70.
- J.L. Tonkinson, et al., Antisense Research and Development, 1994, 4, 269-278.
- X. Yang, et al., Bioorg Med Chem Lett, 1999, 9, 3357-62.
- X. Yang, et al., Ann N Y Acad Sci, 2006, 1082, 116-9.
- X. Yang, et al., Nucleic Acids Res, 2002, 30, e132.
Usage
- Coupling: See Technical Bulletin
- Deprotection: See Technical Bulletin for details.
Specifications | |
---|---|
Diluent | 10% (v/v) Anhydrous Dichloromethane in Anhydrous Acetonitrile |
Recommended Storage | Freezer storage, -10 to -30°C, dry |
Stability In Solution | Use Immediately |
The table below show pack size data and, for solutions, dilution and approximate coupling based on normal priming procedures.
ABI 392/394
Catalog # | Pack Size | Grams/Pack | 0.1M Dil. (mL) | Approximate Number of Additions | |||||
---|---|---|---|---|---|---|---|---|---|
LV40 | LV200 | 40nm | 0.2μm | 1μm | 10μm | ||||
10-1710-02 | 0.25 g | .25grams | 1.79 | 46.33 | 27.8 | 17.38 | 12.64 | 9.27 | 2.32 |
10-1710-90 | 100 µmol | .093grams | 0.67 | 9 | 5.4 | 3.38 | 2.45 | 1.8 | 0.45 |
Expedite
Catalog # | Pack Size | Grams/Pack | Dilution (mL) | Approximate Number of Additions | ||||
---|---|---|---|---|---|---|---|---|
Molarity | 50nm | 0.2μm | 1μm | 15μm | ||||
10-1710-02 | 0.25 g | .25grams | 2.67 | 0.1 | 47 | 29.38 | 21.36 | 2.94 |
10-1710-90 | 100 µmol | .093grams | 1 | 0.1 | 13.6 | 8.5 | 6.18 | 0.85 |
CoA search tool
To request a quote for products:
- Click “Contact Us” in the header bar above;
- Click “Customer Service”;
- Complete the form and provide the following information in the “Comments” section: note you would like a quote, item number (SKU) and quantity;
- Click “Submit”.