| | | | |
1. Identification of the substance/preparation and of the company/undertaking |
| Product details |
| | Formal name: | Pyrrolo-CTP (10mM) |
| | Component name: | Pyrrolo-CTP (10mM) |
| | Product name: | Pyrrolo-CTP (10mM) |
| | Product number: | 81-3017-xx |
| Manufacturer/Supplier |
| | Glen Research |  |
| | 22825 Davis Drive |
| | Sterling, VA 20164 |
| | 1-800-327-4536 |
| | 1-703-437-6191 |
| Further information from: | www.glenres.com |
| Information in case of emergency: | 1-703-437-6191 |
| MSDS-Nr: | MSDS Std 02 |
2. Composition/information on ingredients |
| Chemical Characterization: |
| Essentially 100% | Pyrrolo-CTP (10mM) |
| | a-thiotriphosphates are sodium salts in TE buffer, pH7, 10x concentrate |
| Molecular Weight: | 521.20 | |
| Formula: | C12H18N3O14P3 | |
| Chemical Family: | Pyrimidine Riboside | |
| Description: | Clear Liquid | |
| Dangerous components: | Contains no Metals, Pigments, Catalysts, Vehicle,Coating, Flux |
| TLV units: | Unknown | |
3. Hazardous Identification |
| Hazardous description: | No data available |
| Information concerning particular hazards for human and environment: | No data available |
| Classification system: | None |
4. First-aid measures |
| Always contact physician | | |
| Avoid all direct contact. | | |
| Inhalation: | Local exhaust is usually sufficient. | |
| After contact with skin: | Contact physician. | |
| | Flush thoroughly with water for at least 15 minutes. | |
| After contact with eyes: | Contact physician. | |
| | Flush thoroughly with water for at least 15 minutes. | |
| After ingestion: | Contact physician. |
| | Wash out mouth with copious amounts of water if person is conscious. | |
| Never induce vomiting or give liquids to someone who is unconscious or cannot swallow. |
| Material of unknown toxicity should be handled with care; all exposure should be minimized. |
5. Fire fighting measures |
| Prevention of Fire and Explosion | A finely divided dust aerosol may be explosive although the exact conditions of the hazard are unknown. |
| | Avoid dispersing dust. |
| Fire and explosion hazards | A finely divided dust aerosol may be explosive although the exact conditions of the hazard are unknown.
|
| Flash Point: | Not available |
| Means of extinguishing: | Use material suitable and appropriate to surrounding fire conditions. |
| Class A extinguishing media | Water Spray, Carbon Dioxide, Dry Chemical Powder or appropriate foam as required. |
| Fire fighting procedures: | Use material suitable and appropriate to surrounding fire conditions. |
| Class A extinguishing media; | Dry Chemical, CO2, H2O, Foam |
6. Accidental release measures |
| Person-related safety precautions: |
| Avoid all direct contact. | | |
| Respiratory Protection: | A NIOSH dust mask is recommended when a possibility of dust inhalation exists.
|
| | Local exhaust is usually sufficient. |
| Protective gloves: | Impermeable |
| Eye Protection: | Laboratory safety glasses |
| Other Protective Equipment: | Normal laboratory apparel |
| Measures for environmental protection: | Not necessary |
| Measures for cleaning/collection: | | |
| If a spill occurs: | First sweep up and place material in a suitable container for disposal. |
| | Finish by wiping with a damp towel. |
7. Handling and storage |
| Handling: |
| Information for safe handling: | Avoid all direct contact. |
| | Handle using standard laboratory practices. |
| | Material of unknown toxicity should be handled with care; all exposure should be minimized. |
| Information about fire: | No risk of explosion or fire. |
| Storage: |
| Requirements to be met by storerooms and receptacles: | No further requirements |
| Information about storage in one common storage facility | Not required |
| Further information about storage conditions: | Freezer storage, -10 to -30°C, dry |
| Class according to regulations on flammable liquids: | Void |
8. Exposure controls/personal protection |
| Additional information about design of technical facilities: | No further requirements. See item 7. |
| Ingredients with limit values that require monitoring in the workplace: | No ingredients need monitoring. |
| Personal protective equipment: | The usual precautionary measures are to be adhered to when handling chemicals. |
| Eye protection: | Laboratory safety glasses |
| Respiratory Protection: | Local exhaust is usually sufficient. |
| | A NIOSH dust mask is recommended when a possibility of dust inhalation exists.
|
| Protection of hands: | Impervious gloves are recommended to prevent repeated or prolonged skin contact. |
| Other Protective Equipment: | Normal laboratory apparel. |
9. Physical and chemical properties |
| Form and color: | Clear liquid | |
| Odor: | None | |
| Change in condition: |
| | Melting point/range: | Not available |
| | Boiling point/range: | Not available |
| | Flash point: | Not available |
| | Self-igniting: | Not self-igniting |
| | Danger of explosion: | No explosion hazard |
| | Vapor Density: | Not available |
| | Vapor Pressure: | Not available |
| | Solubility in water: | Soluble |
| | Percent Volatile by Volume: | 0 |
| | Specific Gravity: | Not available |
| | Evaporation Rate (Water=1): | <<1 |
10. Stability and reactivity |
| Thermal decomposition/condition to be avoided: | No decomposition if used according to specifications. |
| Incompatible with bases, acids, and water. |
| Avoid moist environments. |
| Dangerous reactions: | Stable material at room temperatures and pressure in a dry environment |
| | | Hazardous polymerization will not occur. |
| Dangerous decomposition: | Toxic oxides of nitrogen and carbon may evolve when heated to decomposition. |
11. Toxicological information |
| Threshold limit value: | No data available | |
| Overexposure effects: | No data available | |
| Acute toxicity: | No data available | |
| Primary irritant effect: |
| On the skin: | No data available | |
| On the eye: | No data available | |
| Sensitization: | No data available | |
| Additional toxicological information: | This product should be handled with the usual care when dealing with chemicals. |
| | Material of unknown toxicity should be handled with care; all exposure should be minimized |
| |
12. Ecological information |
| General notes: | No data available | |
13. Disposal considerations |
| Product: |
| Recommendation: | Dispose of as a special waste in compliance with official regulations. |
| Unclean packaging |
| Recommendation: | Dispose of in compliance with official regulations. |
| Recommended cleaning agents: | First sweep up the bulk of the material. |
| | Finish by wiping with a damp towel. |
| Waste Disposal: | Dispose of waste according to nature of waste solid,
solution in solvent, others. |
| | Dispose of waste according to
to the local legislation. |
14. Transport information |
| Land transport ADR/RID (cross-border) |
| | ADR/RID class: | Not a dangerous substance as defined in the regulations. |
| Maritime transport IMDG |
| | IMDG class: | Not a dangerous substance as defined in the regulations. |
| | Maritime pollutant | No |
| Air transport ICAO-TI and IATA-DGR |
| | ICAO/IATA class: | Not a dangerous substance as defined in the regulations. |
15. Regulation information |
| Labeling according to EU guidelines: | This takes into account directive 67/548/EEC and 1999/45/EC |
| Hazard Symbol(s) | none |
| S-phrases | S3/14 Keep in a cool place away from acids. |
| | S35 This material and its container must be disposed of in a safe way. |
| | S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. |
| | S46 If swallowed, seek medical advice immediately and show this container or label. |
| Note: The toxicological properties of this material have not been thoroughly investigated. Use prudent laboratory practices for handling chemical substances of unknown toxicity. |
16. Other Information |
| The information provided herein is based on sources believed to be reliable as of May 23, 2011 and pertains only to the material designated.
Glen Research Corporation makes no warranty or representation to its completeness, accuracy,or currency. This material is intended for use by persons with pertinent technical skills and at their discretion and risk. It is the responsibility of the user to determine the product's suitability for its intended use, the product's safe use, and the product's proper disposal.
Disposal of hazardous material may be subject to federal, state or local laws or regulations. |
